Next Save the Profile Settings (you should only have to do that once).įrom the File Tab add the newly captured file (xxx.ts), then click the Stream Button. Under Audio Codec Tab, click on “Keep Original Audio Track” box. Under Video Codec Tab, click on “Keep Original Video Track” box. It is in the Settings section, to the right of the profile drop down list and looks like a tools button. In the Convert page, click the “Edit selected profile” button. ![]() The work around for this, if it occurs, is: ![]() Note that in some versions of VLC the “Dump raw input” check box functionality wasn’t working correctly (data wasn’t being saved in its original format). In the Convert page, enter your Destination file xxx.ts, where xxx is the file name to save, check the “Dump raw input” check box,įinally, click the Start button when you are ready to save/capture the stream. Enter your AVN Stream Destination, including stream type, destination IP and destination port (e.g.: UDP, 225.168.3.29, 1234) then press Convert/Save. Other versions may differ to varying degrees.Ĭhoose the Network Tab to reach the Open Media page. Note version 1.0.3 of the VLC Media Player were used to create these steps. Receive Location’s Router: Port forwarding is set so that any traffic coming to 201.120.101.5:1234 is forwarded to 192.168.1.111:2222 Set up decoder channel for receiving a unicast stream, being sent to its own IP address, and a unique port #.Ĭonfigure port forwarding, to forward incoming stream traffic to the static IP address of the decoder and to the port number configured for the decoder channel.Įncoder’s “Stream Destination” = 201.120.101.5:1234 Use a port number that has been verified as not being used on the receive location’s router.Ĭonfigure with a Static IP address and a valid DNS. ![]() Set “Stream Destination” to the public IP address at the receiving location. Any comments would be appreciated.Make sure that encoder is configured, with a proper DNS, through the networks settings. If this article is helpful to you, please click the " helpful" button after you review it. If you have any other questions, please contact ANNKE technical support at by email. If you are unable to use the RTSP link to play camera view, please disable the stream encryption on the montor. To know more about RTSP, please click on the link below. Input your RTSP address in the box, click Play. Start the VLC player and use the shortcut ‘Ctrl+N’ or navigate to Media-Open Network Stream. Once you finish setting up the RSTP address, please try it on the VLC player to make sure it’s working. For example, an of 101 refers to channel #1 (first digit, 1xx) using the main stream (second and third digits, x01). ![]() refers to the channel number and stream type of the camera. IP: You can get the camera's IP address on the SADP software. Password: The password is the login password used to active your device. The correct description of RSTP is as name: admin (default) The camera can be accessed via the VLC player, Blue Iris, tiny Cam and other software that supports RTSP. The user can download the VLC player on Google or the application store by themselves. The device and the PC must be connected to the same router or switch.Ģ. Download the SADP Tool to find the device IP address on the PC. In this article, we will show you how to set up the RTSP for the ANNKE DVR/NVR.ġ. With the RTSP protocol, the user is able to view the cameras through the video player on the PC.
0 Comments
Leave a Reply. |